Skip to content
Honed_By

Reseal and recoat

Sealer wears. Once it is gone, the concrete is open and stains go in rather than sitting on top. A reseal at the right time keeps a floor close to new for decades.

What you see. Colour depth and sheen come back. Traffic lanes largely even out.

Where it suits. Any honed or polished floor - ours or someone else's - and grind and seal floors due for a recoat.

What to know. A reseal does not remove scratches, fill new holes or change the exposure. Those need grinding, which is a different job. If your floor needs more than a reseal, we say so before we start.

Request a quote
Living room with a concrete floor, fireplace and afternoon light

Who it is for

  • Polished floors laid five to ten years ago
  • Floors that now stain easily or look dull in traffic lanes
  • Grind and seal floors with worn or lifting coating

Included

  • pH-neutral deep clean
  • Light abrasion where traffic lanes have worn
  • Penetrating sealer, applied and wiped back
  • Burnish after cure

Not included

  • Scratch removal or regrinding - quoted separately
  • Moving furniture and appliances

How it runs

  1. 1

    Check

    Send photos and the result of a water test. If the floor is not due, we tell you to leave it.

  2. 2

    Clean

    A pH-neutral deep clean to lift old cleaning residue so the new sealer can bond.

  3. 3

    Seal

    Sealer flooded on, left to dwell, then the excess wiped back before it dries.

  4. 4

    Burnish

    Works the sealer in and lifts the sheen.

Time on site. One day for a penetrating-sealed floor on a typical house. Two days for a coated floor.

Price. Quoted per job from photos. Most houses are a single day.

Questions

How do I know if my floor needs resealing?

Put a few drops of water in a busy spot and wait two minutes. If it beads, you are fine. If it spreads, book a reseal in the next six to twelve months. If it soaks in and darkens the concrete, reseal now.

Do you reseal floors someone else polished?

Yes. Tell us what you know about the original finish and sealer - photos help.

How long before I can walk on it?

Foot traffic after 24 hours. Keep it dry for 72 hours and leave furniture and rugs off for 48.

Other finishes

Tell us about the slab.

Still at plans stage, slab poured, or a floor that is already down - send what you have. Plans, photos or a rough area. We come back with what the slab can do and a day count.